Analisis Karakteristik Marshall pada Beton Aspal Lapis Pengikat (Asphalt Concrete-Binder Course) menggunakan Aspal Modifikasi Serbuk Serat Pelepah Batang Pisang

Desi Widianty, Ratna Yuniarti, Akmaluddin Akmaluddin, Agung Prabowo, Shofia Rawiana

Abstract


Asphalt modification by adding fiber powder of banana stem can be implemented to improve the performance of pure asphalt. Asphalt concrete binder course AC-BC is a flexible pavement layer that functions to distribute the load towards the foundation layer. So it really needs strength, durability and stability of the materials. For that, it is necessary to use asphalt modification with fiber powder of banana stem which is used as a binding material in AC-BC asphalt concrete mixture. The proper percentage of modified asphalt level will determine the optimum quality of an asphalt mixture. Asphalt concrete specimens were made in 3 (three) samples for each variation of asphalt level by 5%; 5.5%; 6%; 6.5%; and 7%. The asphalt optimum level in the mixture is carried out through volumetric investigation in the form of VMA, VIM, and VFB values and mechanical assessment in the form of stability, flow and Marshall Quetient. The results of data analysis found that the value of VIM, stability and MQ tend to decrease with increasing levels of modified asphalt. On the other hand the value of VMA, VFB and flow tend to rise with increasing levels of modified asphalt. However, from the five variations of asphalt levels obtained asphalt levels of 5% and 5.5% which meet all the specifications of AC-BC asphalt concrete specification. To determine the asphalt optimum level, the average of qualified asphalt level is taken. So that the asphalt concrete AC-BC will produce a better structural performance at 5.25% asphalt level with banana stem fiber powder on asphalt by 0.1%.

Keywords


AC-BC; fiber powder of banana stems; asphalt modification

Full Text:

PDF

References


Badan Standarisasi Nasional. 2015, SNI 8198-2015: Spesifikasi Campuran Beraspal Panas Bergradasi Menerus (Laston). Jakarta: Standar Nasional Indonesia.

Mashuri, Patunrangi, J. 2011. Perubahan Karakteristik Mekanis Aspal Yang Ditambahkan Sulfur Sebagai Bahan Tambah. Jurnal Mektek. 13(2) halaman 111-120.

Muhidin, SA, Abdurrahman, M. 2007. Analisis Korelasi, Regresi, dan Jalur dalam Penelitian. Bandung: CV Pustaka Setia.

Pratomo, P. 2016. Aspal Modifikasi dengan penambahan plastik Low Liniear Density Poly Ethylene (LLDPE) ditinjau dari karakteristik Marshall dan uji Penetrasi pada lapisan Aspal Beton (AC-BC). Jurnal Rekayasa. 20(3) halaman 155-165.

Sukirman, S. 2016. Beton Aspal Campuran Panas. Jakarta: Penerbit Yayasan Obor Indonesia.

Widianty, D. 2018a, Pengaruh Penambahan Serbuk Serat Pelepah Batang Pisang Terhadap Karakteristik Sifat Fisik Aspal, Jurnal Rekayasa Sipil dan Lingkungan. 2(1) halaman 67-76.

Widianty, D. 2018b. Kinerja Campuran Beton Aspal Wearing Coarse dengan Tambahan Serbuk Serat Pelepah Batang Pisang. Jurnal Spektrum Sipil. 5(1) halaman 11-22




DOI: https://doi.org/10.29303/jstl.v6i1.119

Article Metrics

Abstract view : 22 times | PDF - 3 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Jurnal Sains Teknologi dan Lingkungan (JSTL)

(ISSN Print: 2477-0329, ISSN Online: 2477-0310)

Lembaga Penelitian dan Pengabdian Kepada Masyarakat Universitas Mataram