Rancang Bangun Penangkap Embun Untuk Meningkatkan Efisiensi Aplikasi Pengabut Air Sebagai Model Mitigasi Urban Heat Island Masa Depan

Design And Construction Of Dew Catchers To Increase The Efficiency Of Water Sharing Applications As A Future Urban Heat Island Mitigation Model

Authors

  • Andreas Luis Program Studi Teknik Arsitektur, Fakultas Teknik, UNIFLOR, Nusa Tenggara Timur
  • Daniel Wolo Program Studi Pendidikan Fisika, Fakultas Keguruan dan Ilmu Pendidikan, UNIFLOR, Nusa Tenggara Timur
  • Insar Damopolii Program Studi Pendidikan Biologi, Fakultas Kehuruan dan Ilmu Kependidikan, UNIPA, Papua Barat

DOI:

https://doi.org/10.29303/jstl.v8i2.368

Abstract

This research was conducted to develop a dew-catching vehicle that will be used to support the application of a water misting system. The dew catcher design is expected to overcome the problem of too large a mist grain diameter in low-pressure water misting applications. The study was conducted using a 110 psi pressure pump and ten nozzles measuring 0.3 mm that sprayed mist from a height of 2 M. In this study, and the dew catcher design used can overcome the disturbance of water droplets due to the production of too large mist grains at low pressure misting. The maximum temperature drop that can be achieved is 7.6°C.

Author Biography

Andreas Luis, Program Studi Teknik Arsitektur, Fakultas Teknik, UNIFLOR, Nusa Tenggara Timur

Program Studi Teknik Arsitektur

Downloads

Published

2022-12-31