Karakterisasi Produk Metalurgi Serbuk Berbahan Limbah Aluminium Paduan dan Kaca

Authors

  • Anak Agung Alit Triadi Teknik Mesin Fakultas Teknik Universitas Mataram
  • I Dewa Ketut Okariawan Teknik Mesin Fakultas Teknik Universitas Mataram
  • Nursaid Nursaid Teknik Mesin Fakultas Teknik Universitas Mataram

DOI:

https://doi.org/10.29303/jstl.v10i3.665

Keywords:

aluminum alloy, glass, powder metallurgy, sintering

Abstract

Aluminum alloy and glass waste is often found in the business of making display racks. It is necessary to do research on the utilization of waste into useful products. This study aims to determine the hardness and compressive strength of objects made of a mixture of aluminum alloy and glass using the powder metallurgy method. The first stage was making aluminum and glass powders up to 100 mesh in size, the next stage was mixing the powders (mixing) with time variations of 70 minutes, 80 minutes and 90 minutes with a composition of 80% aluminum and 20% glass. Then manufacture of specimens with a compaction load of 8 tons. Furthermore, the sintering process at a temperature of 500 oC with time variations of 60 minutes, 90 minutes and 120 minutes, then tested hardness and compressive strength. The results obtained from the hardness test and compressive strength test showed the highest value for the test object with variations in the stirring time and sintering time of 90 minutes. Based on the two-way ANOVA analysis, the mixing time and sintering time obtained the values of Fcount>Ftable, so that the mixing time and sintering time have a significant effect on hardness and compressive strength.

References

Kalpakjian, S., dan Schmid, S. (2006). Manufacturing Engineering and Technology Sixth Edition. New Jersey: Pearson Prentice Hall.

Mediastika, C. E. (2018). Kaca Untuk Bangunan. Surabaya: Kementerian Riset Teknologi dan Pendidikan Tinggi Republik Indonesia.

Nawangsari, P., dan Anuar, K. (2016). Pengaruh Waktu Mixing Terhadap Kekerasan dan Keausan Pada Campuran Serbuk Soda Lime Glass dan Serbuk Piston Bekas Sebagai Material Alternatif Kampas Rem NonAsbestos. Prosiding Seminar Nasional XI “Rekayasa Teknologi Industri dan Informasi" (pp. 345-348). Yogyakarta: Sekolah Tinggi Teknologi Nasional Yogyakarta.

Prasetyo, M. A. 2004 Karakteristik Aluminium Hasil Proses Metalurgi Serbuk. Yogyakarta.

Rusianto, Toto. 2009. Hot Pressing Metalurgi Serbuk Aluminium Dengan Variasi Suhu Pemanasan. Jurnal Teknologi, Vol. 2, No. 1

Surdia, T., dan Saito, S. (2005). Pengetahuan Bahan Teknik. Jakarta: PT Pradnya Paramita.

Tawan, I. G., Suarsana, I. K., dan Santiharsa, I. N. (2019). Pengaruh Waktu Penahanan Dan Temperatur Sintering Komposit Al Matrik Dengan Penguat Al203 + SiCw Terhadap SIfat Densitas Dan Kekerasan. Jurnal Ilmiah TEKNIK DESAIN MEKANIKA Vol. 8 No. 2, 512-516.

Triadi, A., Yudhyadi, I., Suartika, I., dan Sari, N. (2019). Efek Suhu Sintering Terhadap Sifat Kekerasan dan Kekuatan Tekan Bahan Campuran Al/Cu/SiC Melalui Proses Metalurgi Serbuk. Dinamika Teknik Mesin, Vol. 9, No. 2, 80-85.

Widyastuti., Siradj, E. S., Priadi, D., dan Zulfia, A. 2008. Kompakbilitas Komposit Isotropik Al/Al2O3 dengan Variabel Waktu Tahan Sinter. Makara, Sains Vol.12, pp. 133-119 .

Downloads

Published

2024-09-30

Most read articles by the same author(s)